Select the intervals to be used for harmony
Select the key used for harmony and pitch correction
Turn enhance on/off
Activate one of 16 effects
Adjust the selected effects parameter
Adjust levels for each effect
XLR input for Microphone
Turn phantom power (+48v) on/off
Adjust the microphone input volume
Connect devices such as portable music player
1/4" output connections for PA systems, recorders etc
USB connection for Audio interface or power from mobile batteries
1/4" connection
Adjust headphone volume level
Connect optional foot switch (FS-01) or expression pedal (FP-02M)
Connect ZOOM adapter AD-16
EFFECTS: | 16 types |
CONCURRENT EFFECTS: | 5 |
SAMPLING FREQUENCY: | 44.1 kHz |
A/D CONVERSION: | 24-bit 128× oversampling |
D/A CONVERSION: | 24-bit 128× oversampling |
SIGNAL PROCESSING: | 32-bit |
FREQUENCY RESPONSE: | 20 Hz–20 kHz (+1 dB/−3 dB) (10 kΩ load) |
MIC IN: | XLR jack |
INPUT GAIN: | +3 – +40 dB |
MAXIMUM INPUT LEVEL: | +4 dBu |
INPUT IMPEDANCE: | 3 kΩ or higher (1 kHz) |
PHANTOM POWER: | +48 V |
AUX IN: | Stereo mini jack |
RATED INPUT LEVEL: | −10 dBu |
INPUT IMPEDANCE (LINE): | 22 kΩ |
L/R OUT: | Unbalanced TS jacks |
MAXIMUM OUTPUT LEVEL: | +6 dBu |
OUTPUT IMPEDANCE: | 100 Ω |
PHONES: | Stereo mini jack |
MAXIMUM OUTPUT LEVEL: | 20 mW + 20 mW (into 32 Ω load) |
EQUIVALENT INPUT NOISE (WHEN PHANTOM POWER OFF): | –125 dBu or less (A-weighted, 150 Ω input, +40 dB input gain) |
NOISE FLOOR (RESIDUAL NOISE): | –75 dBu |
CONTROL INPUT: | FS01/FP02M input |
POWER: | AC adapter (9 V DC 500 mA, center negative) (ZOOM AD-16) 4 AA batteries (about 3.5 hours continuous operation time when using alkaline batteries) |
USB: CONNECTOR: | Micro USB |
AUDIO INTERFACE OPERATION: | 2-in/2-out USB2.0 Full Speed, 44.1 kHz, 16/24/32-bit |
Power can also be supplied through the USB port. | |
When using a cable designed only for power, other USB functions cannot be used. |
EXTERNAL DIMENSIONS: | 150 mm (D) × 190 mm (W) × 50 mm (H) |
WEIGHT: | 0.59 kg (excluding batteries) |