M-200i 32-Channel Live Digital Mixing Console

Rs. 272,188.00 Rs. 93,000.00

Inclusive of all GST

Sold by Tone Tech Digital Pvt Ltd DELIVERY 48 HOURS IN MAIN CITIES
See some FAQs here
Details

PROCESSING

Channels/Buses

CHANNELS: 32

BUSES: MAIN L/R, 8 AUX, 4 MATRIX

Inputs/Outputs

INPUTS: 24 (64 when using optional REAC devices)

OUTPUTS: 14 (Max 54 ports when using REAC Devices)

Signal Processing

AD/DA Conversion: 24 bit

Sample Rate: 48.0 kHz or 44.1 kHz

Console Latency

2.0 mS (typ.) *1

* Total Latency of audio signal from M-200i's console inputs to M-200i's outputs.

* Sample Rate: 48.0 kHz * Effects: No insert effects

Network Latency

2.5 mS (typ.) *1

* Total System Latency of audio signal from S-1608 inputs to outputs via M-200i's REAC ports.

* Sample Rate: 48.0 kHz

* Effects: No insert effects

CONNECTORS

Inputs/Outputs/Others

INPUT jacks (1 to 16): XLR-3-31 type (balanced, phantom power)

INPUT jacks (17 to 22): 1/4 inch Phone type (balanced)

INPUT jacks (23 to 24): RCA Phono type

ASSIGNABLE OUTPUT jacks (1 to 6): XLR-3-32 type (balanced)

ASSIGNABLE OUTPUT jacks (7 to 10): 1/4 inch Phone type (balanced)

MAIN OUTPUT jacks (L, R): XLR-3-32 type (balanced)

PHONES jack: Stereo 1/4 inch phone type, Miniature phone type

AES/EBU OUT jacks: XLR-3-32 type (110 ohm balanced)

REAC port: RJ-45 EtherCon type

RS-232C connector: 9-pin D-sub type

MIDI connectors (OUT/THRU, IN): 5-pin DIN type

USB MEMORY port: USB Type A

USB WLAN ADAPTOR port: USB Type A

USB COMPUTER port: USB Type B

LAN port: RJ45 type

DOC CABLE port : 10-pin mini DIN type

DOC CABLE port : 10-pin mini DIN type DC IN jack

Grounding terminal

* XLR type: 1 GND, 2 HOT, 3: COLD

* Phantom power: DC+48V (unloaded maximum), 14mA (maximum load, All XLR type inputs)

INPUT/OUTPUT CHARACTERISTICS

Frequency Response

ASSIGNABLE OUTPUT jacks (1 to 10): -2 dB / +0 dB (20k ohms load, +4 dBu, typ.)

MAIN OUTPUT jacks (L, R): -2 dB / +0 dB (20k ohms load, +4 dBu, typ.)

PHONES jack: -3 dB / +0 dB (40 ohms load, 150 mW, typ.)

* Sample Rate: 48.0 kHz or 44.1 kHz

* Input Connector: INPUT 1 to 24 (Pad: ON, Input sens: +4 dBu, 20 Hz to 20 kHz

Total Harmonic Distortion + Noise

ASSIGNABLE OUTPUT jacks (1 to 10): 0.05 % (+4 dBu, typ.)

MAIN OUTPUT jacks (L, R): 0.05 % (+4 dBu, typ.)

PHONES jack: 0.05 % (40 ohms load, 150 mW, typ.)

* Sample Rate: 48.0 kHz or 44.1 kHz

* Input Connector: INPUT 1 to 24 (Input sens: +4 dBu, 20 Hz to 20 kHz)

Dynamic Range

ASSIGNABLE OUTPUT jacks (1 to 10): 102 dB (typ.)

MAIN OUTPUT jacks (L, R): 102 dB (typ.)

* Sample Rate: 48.0 kHz or 44.1 kHz

* Input Connector: INPUT 1 to 24 (Input sens: +4 dBu, 20 Hz to 20 kHz)

Crosstalk@ 1 kHz

INPUT jacks (1 to 24): -80dB (Input sens: +4 dBu, IHF-A, typ.)

ASSIGNABLE OUTPUT jacks (1 to 10): -88 dB (typ.)

MAIN OUTPUT jacks (L, R): -88 dB (typ.)

* Sample Rate: 48.0 kHz or 44.1 kHz

Nominal Input Level (Variable)

INPUT jacks (1 to 16): -65 to +4 dBu

INPUT jacks (17 to 24): -28 to +4 dBu

Input Impedance

INPUT jacks (1 to 16): 14 k ohms

INPUT jacks (17 to 24): 10 k ohms

Non Clip Maximum Input level

INPUT jacks (1 to 24): +22dBu (1 kHz, 20 k ohms load, typ.)

Nominal Output Level

ASSIGNABLE OUTPUT jacks (1 to 10): +4 dBu (Load impedance: 10 k ohms, typ.)

MAIN OUTPUT jacks (L, R): +4 dBu (Load impedance: 10 k ohms, typ.)

Output Impedance

ASSIGNABLE OUTPUT jacks (1 to 10): 600 ohms (typ.)

MAIN OUTPUT jacks (L, R): 600 ohms (typ.)

PHONES jack: 49 ohms (typ.)

Recommended Load Impedance

ASSIGNABLE OUTPUT jacks (1 to 10): 10 k ohms or greater

MAIN OUTPUT jacks (L, R): 10 k ohms or greater

PHONES jack: 40 ohms or greater

Minimum Load Impedance

PHONES jack: 16 ohms

Non Clip Maximum Output level

ASSIGNABLE OUTPUT jacks (1 to 10): +22 dBu (1 kHz, 10 k ohms load, typ.)

MAIN OUTPUT jacks (1 to 10): +22 dBu (1 kHz, 10 k ohms load, typ.)

PHONES jack: 150 mW + 150 mW (1 kHz, 40 ohms load, typ.)

Residual Noise Level (IHF-A, typ.)

-88 dBu (All faders: Min)

-80 dBu (Main Fader: Unity, Channel faders: Unity only one INPUT1 channel, Preamp sens: Min)

-61 dBu (Main Fader: Unity, Channel faders: Unity only one INPUT1 channel, Preamp sens: Max)

* Input 150 ohms terminate

* Output Connector: ASSIGNABLE OUTPUT jacks (1 to 10), MAIN OUTPUT jacks (L, R)

* Sample Rate: 48.0 kHz or 44.1 kHz

Equivalent Input Noise Level (E.I.N.)

-126 dBu (Main Fader: Unity, Channel faders: Unity only one channel, Preamp sens: Max)

* Output Connector: ASSIGNABLE OUTPUT jacks (1 to 10), MAIN OUTPUT jacks (L, R)

* Sample Rate: 48.0 kHz or 44.1 kHz

OTHERS

Display

Graphic LCD 132 x 64 dots with backlight

Current Draw

3.6 A

Operation Temperature

+5 to +40 degrees Celsius

+41 to +104 degrees Fahrenheit

Accessories

DOCK CABLE, TABLET STAND, AC Adaptor, Power Cord, Owner's Manual

Options

Rackmount Kit: RA-10U, Wireless USB Adapter: WNA1100-RL USB Flash Memory

SIZE AND WEIGHT

Width

491 mm
19-6/16 inches

Depth

490 mm
19-5/16 inches

Height

198 mm
7-13/16 inches

Weight

9.8 kg
21 lbs. 10 oz.